Mock challenge for FP
This was the mock up challenge we did during week 8 of our fab journey. At first i didn't have any idea how to overcome the mock up challenge and our instructor came with some cardboard, scissors, blades and cello-tape and instructed us to do this mock up challenge for your final project using these things within three hours we were to present in front of our instructor so without wasting any time we worked on cutting the card board and designing for the final project.
So i decided to brain storm how to display my final project , I decided to place my heating pads with the card board below with the components and names. The switch button is outside the jacket which controls the whole system to turn off and on when you are using it and when you are not.